Stamping Die Set

Stamping Die Set

Jinyang stamping die sets are precision-guided upper and lower holders that locate punch and die blades in a power press. With hardened guide posts and bushings, they keep punch and die aligned for repeatable, accurate stamping over long production runs.

How It Works

The die set consists of an upper shoe (mounted to the press ram) and a lower shoe (mounted to the press bed), connected by precision guide posts and bushings. Punch and die blades are bolted to the shoes. The guides keep perfect alignment as the press cycles, so every stamped part is consistent.

Key Features

• Precision guide posts - hardened posts and bushings keep punch/die aligned.

• Rigid shoes - cast or steel plates resist deflection under press load.

• Long life - hardened guides wear slowly over millions of strokes.

• Standard sizes - wide range of shoe sizes and post spacings.

• Quick blade change - bolts allow swaps when blades wear.

• Custom available - sizes and configurations to match presses.

Technical Options

Shoe sizes from small to large, post types (ball-bearing or plain), standard or custom. Cast iron or steel shoes; precision or commercial grades.

Typical Applications

Housing for stamping dies in blanking, piercing, bending, and drawing operations across metal forming.

Why Choose Jinyang

With over 20 years of precision tooling experience, Hebei Jinyang Environmental Protection Equipment Co., Ltd. supplies stamping die sets worldwide. Contact Jinyang for sizes.